Entertainment System Instructions

As promised, here are the instructions for the new entertainment system (it’s not nearly as ominous as it seems):

Living room AV Instructions

Cable TV: All components must be OFF to start. Remote must display MAIN (push MAIN button)

1. Using the MX350 remote control (Aim towards TV) hold down the green ON button near center of the remote for 3-seconds. This will turn on the TV, Cable TV receiver and the A/V receiver

2. The MX350 remote control will now operate Cable TV functions and Main volume. 3. Holding down the red OFF button (middle) for 3-seconds will turn everything OFF.

DVD/Internet TV: All components must be OFF to start. Remote must display MAIN (push MAIN button) NetFlix & Panadora takes a few minutes to load data, please be patient. 1. Using the MX350 remote control (Aim towards TV) hold down the Green ON button near center

of the remote for 3-seconds. 2. Now hold down the button labeled 2DVD (near the LCD display) for 3-seconds, this will turn

the DVD/CD player ON. It is now ready for you to load your DVD, CD or use the function buttons (up/down, right/left, select) to select the on-screen icon Network then select Internet TV (this can take a few minutes). Select the NetFlix, Pandora or More icons and follow the steps using the function buttons. Use the Guide and Exit buttons to return to the Home Menu. Always exit NetFlix and Pandora before using 2CATV macro/short cut. Continue to instruction 3. for DVD/CD playing.

3. Push the OPEN/CLOSE button (on the DVD/CD player) to eject the disc tray. 4. Load the DVD or CD on to the disc tray platter. 5. Press the PLAY ( > ) button on DVD/CD player. 6. The MX350 remote control will now operate the DVD/CD player and Main volume. 7. To go back to Cable TV, push the 2CBL button. Go back to Cable TV before Off 8. Holding down the Red OFF button (middle) for 3-seconds will turn all components Off.

iPod Music: All components must be OFF to Start. Remote must display MAIN (push MAIN button)

1. Use your own USB/iPod Cable, connect to the USB jack on the front of the AV Receiver. 2. Using the MX350 remote control (Aim towards TV) hold down the Green ON button near center

of the remote for 3-seconds. (Cable TV will display, this is OK) Proceed. 3. Now hold down the button labeled 2IPOD (near the LCD display) for 3-seconds, this will load

the iPod data into the Yamaha A/V receiver. The TV will display your iPod menu. 4. Use the Function buttons (up/down, right/left, select) to navigate the iPod menu. You may also use the Play, Pause, Stop and Skip buttons. (shown as icons only)

5. To go back to Cable TV, push the 2CBL button. 6. Holding down the Red OFF button (middle) for 3-seconds will all components OFF.

FM Tuner:

1. Push the TUNER button (on the front of the Yamaha AV receiver) 2. Use the PRESET/TUNING buttons to tune stations.

To control the individual component functions press the MAIN button. The LCD display will change to the main screen and show TV, CABLE, DVD & AUDIO. Press the button of the component that you want to control. The LCD display will change to show new functions for each component.

Please turn off all components when not in use.


Leave a Reply

Your email address will not be published. Required fields are marked *